I am always baffled when I see Airstream interiors with a couch or two chairs under the panoramic window. What a waste of space! The dinette with seating that wraps around a table is obviously the way to go, so one can maximize on seating, have a decent table at which to eat, and also to collapse into an extra bed. Not to mention all the extra storage in the dinette bench seats!
However, I can’t believe how hard it is to find a decent telescoping base for a dinette table!
Most of the choices come from yacht outfitters, and are thus astronomically priced. The few “RV Specific” bases I have found seem to be poorly reviewed as a result of being poorly constructed (weak materials that lead to wobbling and bending). The two companies that come up most often in a search for RV dinette/table bases are Springfield and Garelick. The products from each company look to be fairly similar, but for what it’s worth, the reviews for the Springfield products are much better than those for the Garelick. This means that either the Springfield bases are a superior product, or Springfield has a better social media and internet team.
Through Deck vs. Surface Mount
Since I’m rebuilding from scratch, this wouldn’t be as much of an issue for me, but it definitely does lock you in to the position you originally install (since it telescopes through a permanent hole in the floor, and sticks out into the belly pan area). I think most people will want a surface mount base, and since there isn’t much difference in availability between surface mount and through-deck, I’m just going to stick with surface mount (which is ultimately an easier install anyway).
The surface mount, telescoping pedestal base that seems most solid, best reviewed, and within price range (though still more expensive than I would expect at around $400) is the Springfield 12″ – 28″ Anodized Air-Powered 3-Stage Table Pedestal. There are three slight variations that included differences in lift range and finish materials, but this one has the lowest price (by about 40 bucks) and the highest reviews. It’s also conspicuously similar to the base pictured in the Airstream brochure photo above, so there’s that.
Another interesting and slightly less expensive (around $250) option from Springfield is the lever lift Springfield Marine 1660203 Polished Aluminum 12-25 Inch Adjustable Hinged Boat Table Pedestal, though it’s quite a bit bulkier, and I see lots of opportunity for pinched (or even lost!) fingers.
Penguine Eng LTD looks great and has a lot of selection, but it’s in Great Britain, so there’s VAT and shipping on top of already “luxury” pricing.
Motorized is great for the “wow” factor, but my philosophy is, “The more you motorize things, the more opportunity there is for mechanical failure.” If you can make something function well without sacrificing ease of use, that is the way to go. Can gas/air systems fail? Of course. Will they fail as often as something that uses electricity, plastic gears, wires and solder, etc.? Nope. If gas/air makes it easy to lift/lower a table (vs. a completely manual system which is difficult to slide up and down and lock in place) while minimizing the chance of mechanical failure, then for me, a gas/air lift telescoping base is the superior choice.
Have you found something else that you like or think works better? Leave a comment and let everyone know!